How to Get Shoe Sole White Again

Download Article

Download Commodity

Discoloration of the rubber on your shoes is often caused past a buildup of clay and crud, and while information technology may make them look worn to y'all, you tin can revitalize your shoes with a bit of effort. Cleaning the safe soles on your shoes can go along them looking newer longer, and save you from needing to buy another pair for some time.

1. ane

   Remove whatsoever caked-on dirt. If your shoes are particularly muddy, y'all may want to starting time by taking them outside and slapping them together to knock loose any large bits of dirt or mud. If you go out too much mud on the shoe, it volition take a lot longer to get them make clean.^[one]

   • Make sure to slap the shoes together outdoors so you don't make a mess inside your house.
   • Yous may even want to utilize a butter pocketknife or central to scrape set mud out of grooves in the shoe.

2. 2

   Apply a dry out brush to remove loose dirt. Before you begin scrubbing away at the rubber parts of your shoes, starting time by brushing or even scraping off whatsoever loose dirt that's stuck to it. The more you remove with a dry out brush, the less mess you lot'll have to deal with once you lot create your cleaning solution.^[two]

   • Don't worry about scrubbing too much, if the dirt doesn't come free apace, it will once you begin using the cleaning solution.
   • Use a dry brush like a toothbrush, but avoid steel bristle brushes that may damage the condom soles of your shoes.

   Advertizing

3. three

   Mix 1 part baking soda and i part laundry detergent. Depending on how much yous need to clean, you likely won't need much baking soda or laundry detergent. Begin by mixing a tablespoon of each in a minor basin thoroughly. You can always add more than of each ingredient if you find yous oasis't made plenty.^[3]

   • The baking soda will act as an annoying to help the lather remove dirt and grime.
   • Avoid using laundry detergents with bleaching agents.
   • If your shoes aren't super-dingy, you can besides merely employ a warm water with a few drops of dish soap.^[4]

4. 4

   Scrub the prophylactic with your cleaning solution. Utilize your brush to apply the combination of baking soda and laundry detergent to the safety portion of your shoes, then scrub information technology in. Using a circular motility with the brush is ofttimes the most effective fashion to remove dirt and grime.^[5]

   • You may desire to avoid using this cleaning combination on the fabric of your shoes, every bit the baking soda may be difficult to thoroughly rinse off.
   • You can make a separate mixture of just detergent and h2o to make clean cloth portions of your shoes.

5. 5

   Use a different sponge or textile to thoroughly rinse the condom. In one case you've adequately scrubbed the cleaning combination into the rubber soles of your shoes, take another clean cloth or sponge and soak it in clean water. Run it along the safety, rinsing it with each pass until all of the mixture has been rinsed away..^{[half dozen]}

   • Failing to remove all of the cleaning mixture can leave the rubber looking discolored.
   • Leaving the detergent mixture on the shoe can also brand them very glace and dangerous.

6. 6

   Dry out the shoe completely. Once you lot have rinsed all of the lather off of the shoe, use a clean towel to dry the safe before you wear the shoes over again. Once you have the shoe dry, you'll accept a better sense of how well the cleaning mixture did, and you lot can repeat the process at this indicate if you need to.^[7]

   • Leaving the shoes wet could lead to them get-go to smell.
   • Wet shoes can be dangerous to wear, and then exist sure they're completely dry and complimentary of soap before putting them on.

   Advertisement

1. 1

   Fill a pan with less than an inch of water. Find a pan that is large enough to fit your shoes in information technology, then fill it with enough water to submerge only the condom soles. Make sure that the water is lukewarm and clean of any dirt or debris.^[eight]

   • Think when filling it that equally y'all put the shoes in the pan, the water level will rise.
   • If need be, you lot can soak one shoe at a time.

2. 2

   Add dish soap to the water. Once the h2o level is about correct, add one squirt of a balmy dish detergent to the water and mix it thoroughly. The dish detergent is integral to the soak working, as water alone probable won't interruption upward stuck on grime.^[9]

   • If you are soaking white rubber on white shoes, you may even choose to use a very small corporeality of bleach rather than dish soap.^[10]

3. 3

   Soak the safe for a few minutes. Get out the rubber portion of your shoe submerged in water and allow it to soak for a few minutes. This should let it time to intermission upwardly any stuck on dirt and crud and make information technology easier to scrub what's left off of the condom.

   • Bank check to ensure that just the safety is soaking in the water.
   • You may choose to allow the shoes to soak even longer than 15 minutes if they're really dirty.

4. iv

   Use a scrub brush to remove any remaining dirt. After the safety has soaked for a while, remove the shoes and use the soapy water to scrub away whatsoever remaining bits of dirt and grime that are notwithstanding stick to the shoe's condom. Avoid using a steel bristle brush as it may cause damage to the shoe.^[xi]

   • If need exist, yous can soak the shoes once again later on this step.
   • If y'all are using a bleach solution, yous may desire to wear gloves to avert whatever potential peel irritations.

   Advertisement

1. 1

   Remove any dirt or mud from the prophylactic first. Nail polish remover tin practice an excellent job of removing discoloration and even crud from the rubber parts of your shoes, just information technology'due south non a good choice if your shoes are caked with mud or are any color other than white.^[12]

   • Yous may want to launder the rubber parts of your shoes using one of the other methods before using nail polish remover on scuffs.
   • Practice non utilise the nail polish remover on the material portions of the shoe.

2. 2

   Soak a cotton ball in smash polish remover. While you can utilise a number of things to utilize nail polish remover to the prophylactic soles of your shoes, cotton assurance tend to be the best size and shape to easily clean the sides of your rubber soles and other pocket-size bits of rubber. ^[thirteen]

   • Yous may want to vesture gloves when dealing with nail polish remover.
   • You will likely need more than 1 cotton ball if the shoes are dirty.

3. 3

   Scrub away any scuff marks. Using the nail polish remover soaked cotton balls, showtime by scrubbing away any scuff marks on the safety soles. In doing so, yous may find that the unabridged expanse you scrub shows as a brighter shade of white than the rest of the sole you lot've however to clean.^[14]

   • Scrub away all of the meaning scuff marks before moving on to cleaning the whole sole.
   • You may need to employ more than one cotton fiber ball on some really set up scuff marks.

4. 4

   Clean the rest of the sole with the nail polish remover. One time the significant scuffs and stains take been removed from the shoe'due south sole, run the nail polish remover soaked cotton balls along the entirety of the sole, scrubbing when necessary to clean the entire expanse completely.^[xv]

   • If you do not clean the entire sole, parts volition still appear discolored compared to the brighter whites y'all achieved in the areas y'all already scrubbed.

   Advertisement

Add together New Question

• Question

  How exercise yous clean white rubber soles?

  

  Penny Simmons is a Shoe Care Specialist and the Founder of Penny Loafers Shoe Shine Visitor Inc. in Toronto, Canada. With over 25 years of experience, Penny specializes in shoe cleaning and shining. Penny offers shoe shining at special events, kiosks in Toronto'southward secret metropolis, The PATH, and drop-off services. Penny Loafers Shoe Smooth Company also operates the oldest shoeshine parlor in Canada. Penny Loafers Shoe Polish Company has been featured in Best of The Metropolis - Toronto Life, Saturday Dark Magazine, National Mail service, Globe & Mail, and Toronto Star.

  

  Shoe Intendance Specialist

  Expert Answer

• Question

  Will this work on boots, too?

  

  Yes. Every bit long as the boots aren't all cloth, the methods should work perfectly. Simply make sure not to soak them.

• Question

  How do I clean rubber on my shoes if there is mud on information technology?

  

  Scrape what mud you can from the shoes and spray the remainder off with water. And so follow this guide.

• Question

  Do I need to use nail smoothen to clean condom on my shoes?

  

  No, do not utilise nail polish, that'll add together colour. Instead, merely use one of the other methods, and if you want to use the remover, then you tin.

• Question

  How do I get ink off rubber?

  

  You could probably use a Mr. Make clean magic eraser if information technology'southward on white, just if it's on darker areas, then utilize a mixture of laundry detergent and water.

• Question

  How do I make the rubber on my shoes white again?

  

  Soak them in bleach, baking soda and soap. Let information technology sit for 4 to 24 hours or more, the longer the meliorate. Then take a sponge and rub the shoes with it, if it has some clay left over.

Ask a Question

200 characters left

Include your electronic mail address to go a message when this question is answered.

Submit

Advertisement

• Avoid using detergents or cleaners with bleach in them unless you're cleaning white shoes.

• Make sure your shoes are rinsed well, otherwise they may be extremely slippery.

• After your shoes are clean, yous tin can use nail polish remover to touch upwards scuffs as they occur.

• You may need to repeat the cleaning procedure more than than in one case to go your shoes looking new again.

Advertisement

Virtually This Article

Article Summary X

To clean the condom soles on your shoes, start by removing any caked-on dirt by slapping the bottoms of your shoes together while yous're outside. If there's still a lot of dirt, scrub it away using a soft dry brush, like a toothbrush. After you've removed the backlog debris, create a cleaning solution that's 1 part baking soda and 1 office laundry detergent. Using your brush, apply the cleaning solution to the condom soles of your shoes until they're clean. When yous're happy with how they look, apply a clean cloth or sponge soaked in clean water to wipe downward the condom. Brand sure you rinse all of the cleaning mixture away, or the rubber could go discolored. Finally, employ a make clean towel to dry out your shoes completely before wearing them again. For tips on how to clean the rubber soles of your shoes past soaking them, keep reading!

Did this summary assistance y'all?

Thanks to all authors for creating a folio that has been read 441,673 times.

Did this article help y'all?

robinsonaddren.blogspot.com

Source: https://www.wikihow.com/Clean-Rubber-on-Shoes